|
CORROSION
CONTROL
1. Is a necessity.
Common methods employed Metallic/Polymeric
Conversions, Cementitious
Coatings.
2. In conventional
methods, pre-treatments are
crucial and often defective
resulting in blistering, early
rusting & flash rusting.
3. Repeated coatings result
in high cost of maintenance.
4. DCS's New Approach-
-
To apply Z300TM
only the rusted
parts & arrest
corrosion
phenomenon
-
Coating/painting
only of treated portion
-
Ensure
no further corrosion
occurs, thus, avoid
repeated coatings
|
1.
Penetrates corrosion layers
2. Anchors itself to the metal
3. Arrests the corrosion
4. Forms bond with the metal
5. Prevents any further Corrosion
6. Z300TM action,
protecting coating can be
applied for longer safeguarding
of metal
|
|
Z300TM
IS A…
1. Polymeric, non-ionic,
complex compound.
2. Water Repellant.
3. Antistatic, high
penetration ability
4. Adherence/Anchoring
5. Non-reactive to
Paint.
6. Available in liquid
form.
7. Can be easily sprayed
or brushed.
8. Packaged in convenient
packs of 5, 50 & 200 liters.
9. Dispensed through
50 ml dispenser.
10. Can be applied
even in high humid conditions.
|
Z300TM
IS NOT…
1.
A conventional rust remover
or short duration prevention
agent.
2. A carcinogenic or
toxic, high ash, liquid.
3. A liquid that contains
free acid.
4. Reactive to paints,
latex etc.
5. A protective film
forming compound.
6. A paint, primer
or equivalent.
|